Delivery

Electrical Wholesalers est. 1890

registerRegister basketBasket
Christmas Special Offers Hurry! While Stocks Last

Sensors And Detectors

Surface and Flush PIR Sensors, Presence and absence detectors from Danlers, Lynteck and Timeguard

Danlers CEFLPIR Flush Ceiling Occupancy Switch
Danlers CEFLPIR Flush Ceiling Occupancy Switch - DALCEFLPIR

Ceiling flush-mounted PIR switch. These neat and unobtrusive models are ideal for flush mounting through suspended or plasterboard ceilings. Supplied with a 2m cable, for quick installation.

This range of passive infra-red occupancy switches is designed for the automatic control of lighting loads with the additional benefit of manual temporary intervention when used with a retractive wall switch (momentary).

  £40.02 INC. VAT
Lynteck LY15-032-33 360o Flush occupancy detector
Lynteck LY15-032-33 360o Flush occupancy detector - LYNLY1503233

The Occupancy Sensor is a fully automatic indoor controller capable of controlling up to 2000W incandescent and 1500W flourescent lighting, using a passive infrared sensor which reacts to changes in heat patterns created by movement.

Features

360degree detection angle

Micro detection

Switches up to 6 amps

Linkable LS terminals for common load switching

Recessed ceiling mount

Features

The Occupancy Sensor has two different settings: Time Adjust This function controls how long the light will stay on after motion has been detected. This ranges from 5 seconds - 40 seconds.

LUX Adjust This function determines at what light level the light will start operating.

  £24.78 INC. VAT
Lynteck LY15-033-34 360o Surface occupancy detector
Lynteck LY15-033-34 360o Surface occupancy detector - LYNLY1503334

The Occupancy Sensor is a fully automatic indoor controller capable of controlling up to 2000W incandescent and 1500W flourescent lighting, using a passive infrared sensor which reacts to changes in heat patterns created by movement.

Features

360degree detection angle

Micro detection

Switches up to 6 amps

Linkable LS terminals for common load switching

Fits standard pattress box for ease of installation

Features

The Occupancy Sensor has two different settings: Time Adjust This function controls how long the light will stay on after motion has been detected. This ranges from 5 seconds - 40 seconds.

LUX Adjust This function determines at what light level the light will start operating.

  £23.52 INC. VAT
Timeguard HF1 360 Degree HF Ceiling Microwave Detector – Flush Mount
Timeguard HF1 360 Degree HF Ceiling Microwave Detector – Flush Mount - TIMHF1

This integrated HF sensor emits high frequency electromagnetic waves (5.8GHz) and receives their echo from which any change is perceived by the sensor indicating the presence or motion.

  • High frequency technology for instant reaction.
  • Up to 1000W loading incandescent or halogen, 500VA fluorescent/low energy.
  • Enhanced 360° HF detection zone for optimum coverage.
  • Up to 6m detection range for motion and presence at 3m mounting height.
  • HF detects around partitions and through glass, doors and walls.
  • User-friendly adjustment for:
  • Time ON: 3 seconds to 30 minutes
  • Range: 0.5m to 6m
  • Light Level: 1 to 2000 Lux.
  • Manual override switchable for 4 hours.
  • Requires a 112mm diameter cut out.
  • Not suitable for discharge lighting.
  • IP20 environmental rating (internal use only).

  £33.00 INC. VAT
Timeguard HF2R 360 Degree Microwave Ceiling Presence Detector – Flush Mount
Timeguard HF2R 360 Degree Microwave Ceiling Presence Detector – Flush Mount - TIMHF2R

  • High frequency technology for instant reaction.
  • Up to 1000W loading for incandescent, 440VA fluorescent, energy saving lamps and 100W LED. 
  • Enhanced 360° detection zone for optimum coverage. 
  • Up to 7m diameter detection range (3.5m radius) for motion detection at 3m mounting height. 
  • HF detects around partitions and through glass, doors and walls. 
  • User-friendly adjustment for: 
  • Time ON: 30 seconds to 30 minutes 
  • Light Level: 5 to 1000 lux 
  • Requires a 64mm diameter cut out. 
  • Not suitable for discharge lighting. 
  • IP20 environmental rating (internal use only)

  £33.00 INC. VAT
Timeguard IR10 Infra Red Remote Control
Timeguard IR10 Infra Red Remote Control - TIMIR10

For use with PIR Presence detector models PDSM361, PDSM362, PDFM361 and PSFM362.

  • Ceiling mount presence detectors can be set up and adjusted without the use of ladders.
  • Adjustable light (LUX) and time on levels at the touch of a button.
  • Easy to set by symbol recognition.
  • Extended lamp ON times available.
  • 3m (approx) transmission range.
  • 3V DC (CR2032 battery) factory fitted & replaceable.

  £10.38 INC. VAT
Timeguard MLSA360N Nighteye Black PIR 360 degree Wall Mount.
Timeguard MLSA360N Nighteye Black PIR 360 degree Wall Mount. - TIMMLSA360N

Timeguard’s enhanced PIR range goes outdoors with the MLSA360N, offering multiple mounting options with full 360° detection over a 12m range for optimum coverage.

Adjustable PIR detector with Pan & Tilt sensor aiming adjustment. nnection.

  £39.54 INC. VAT
Timeguard MLW3000 3kW White PIR with 8 hour Holiday Mode
Timeguard MLW3000 3kW White PIR with 8 hour Holiday Mode - TIMMLW3000

MLW3000 3000W Night Eye PIR Light Controller - White 12m detection range with 200degree area of detection. Light ON times adjustable from 5 seconds to 18 minutes. Scrolling LED System Live status acts as advance deterrent. Adjustable light level control. Manual ON/OFF override.

Optional holiday mode between 1 & 8 hours. Direct mount bracketless fixing – Contractor quick fit aid supplied. IP55 weatherproof rating. Total PIR switching: 3000W halogen/incandescent, 500W fluorescent/low energy.

  £39.84 INC. VAT
Timeguard MTLW3000 Nighteye 3kw White PIR Light Controller
Timeguard MTLW3000 Nighteye 3kw White PIR Light Controller - TIMMTLW3000

Shares all the features and benefits of the SLW2400 plus a 200º detection area, IP55 weatherproof rating and total PIR switching of 3000W incandescent/halogen or 500W fluorescent/low energy lighting.

  • 12m detection range with 200º area of detection.
  • Total PIR switching: 3000W halogen/incandescent, 
    600W fluorescent/low energy.
  • Adjustable light level control.
  • IP55 weatherproof rating.
  • Adjustable light ON time 5 seconds to 18 minutes.
  • Manual ON/OFF override.
  • Hinged back box for ease of wiring.

  £39.84 INC. VAT
Timeguard PDFM1500 Flush Mount 360 Degree PIR Presence Detector
Timeguard PDFM1500 Flush Mount 360 Degree PIR Presence Detector - TIMPDFM1500

Timeguard take PIR Presence Detection to the next level for optimum coverage and with up to 1500W loading and 10m detection range this powerful unit is the ideal choice for all energy saving installations.

  • Switches lights ON when presence is detected and to light level (LUX) settings.
  • Ideal for energy saving installations in the workplace, corridors, offices, toilets etc.
  • Up to 1500W loading (6A) for incandescent, halogen, fluorescent and inductive lighting or 250W (1A) fan.
  • Units can be wired in parallel (not exceeding total load).
  • Enhanced 360° detection zone for optimum coverage.
  • Up to 10m detection range for motion and 3m for presence detection at 3m mounting height.
  • User-friendly adjustment for:
* Light level –5 to 1000 LUX
* Time ON –1 to 30 minutes.
  • IP44 environmental rating (internal use only).
  • Requires a 63mm or 64mm diameter installation hole cut-out.
  £33.48 INC. VAT
Timeguard PDFM361 Flush Mount 360 Degree PIR Presence Detector Single Channel
Timeguard PDFM361 Flush Mount 360 Degree PIR Presence Detector Single Channel - TIMPDFM361

Shares the features and benefits of the PDSM361 but is flush mounted.

Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference.

  • Single channel surface ceiling mount.
  • Switches lights on when presence is detected and to light levels (LUX) set.
  • 360º circular detection, range up to 7m at 2.5m mounting height.
  • 3 user friendly adjustments for Time, LUX levels and Metre range.
  • Timer adjustment – continuous from 5 sec to 20 minutes (up to 30 or 60 minutes with IR10 remote).
  • Lux adjustment – continuous from 10 to 2000 Lux.
  • Metre adjustment – approx (-) dia 1m to (+) dia 7m at 2.5m height.
  • Total switching: 2000W incandescent/halogen, 750W fluorescent/low energy.
  • Optional infra-red remote control for remote set-up and adjustment using part code IR-10. Also gives extended lamp ON times.

  £33.48 INC. VAT
Timeguard PDFM362 Flush Mount 360 Degree PIR Presence Detector 2 Channel
Timeguard PDFM362 Flush Mount 360 Degree PIR Presence Detector 2 Channel - TIMPDFM362

Shares the features and benefits of the PDFM361 but is flush mounted and has two outputs switching lights and HVAC loads and timer adjustments for each channel.

Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference.

  • Single channel surface ceiling mount.
  • Switches lights on when presence is detected and to light levels (LUX) set.
  • 360º circular detection, range up to 7m at 2.5m mounting height.
  • 3 user friendly adjustments for Time, LUX levels and Metre range.
  • Timer adjustment – continuous from 5 sec to 20 minutes (up to 30 or 60 minutes with IR10 remote).
  • Lux adjustment – continuous from 10 to 2000 Lux.
  • Metre adjustment – approx (-) dia 1m to (+) dia 7m at 2.5m height.
  • Total switching: 2000W incandescent/halogen, 750W fluorescent/low energy.
  • Optional infra-red remote control

  £37.80 INC. VAT
Timeguard PDRS1500 Surface Mount Round 360 Degree PIR Presence Detector
Timeguard PDRS1500 Surface Mount Round 360 Degree PIR Presence Detector - TIMPDRS1500

  • Switches lights ON when presence and motion is detected in combination with light levels (LUX adjustment) pre-set by user.
  • Up to 2300W loading for incandescent/halogen, 1500W fluorescent, 420W LED or 250W fan. 
  • Enhanced 360° detection zone for optimum coverage. 
  • Up to 10m detection range for motion and 3m for presence detection at 3m mounting height. 
  • User-friendly adjustment for:  Time ON - 1 to 30 minutes; Light Level - 5 to 1000 LUX.
  • Units can be wired in parallel (not exceeding total load). 
  • IP44 environmental rating (internal use only).

  £33.48 INC. VAT
Timeguard PDSM1500 Surface Mount 360 Degree PIR Presence Detector
Timeguard PDSM1500 Surface Mount 360 Degree PIR Presence Detector - TIMPDSM1500

Timeguard take PIR Presence Detection to the next level for optimum coverage and with up to 1500W loading and 10m detection range this powerful unit is the ideal choice for all energy saving installations.

  • Switches lights ON when presence is detected and to light level (LUX) settings.
  • Ideal for energy saving installations in the workplace, corridors, offices, toilets etc.
  • Up to 1500W loading (6A) for incandescent, halogen, fluorescent and inductive lighting or 250W (1A) fan.
  • Units can be wired in parallel (not exceeding total load).
  • Enhanced 360° detection zone for optimum coverage.
  • Up to 10m detection range for motion and 3m for presence detection at 3m mounting height.
  • User-friendly adjustment for:
  • Light level – 5 to 1000 LUX
  • Time ON – 1 to 30 minutes.
  • IP55 environmental rating(internal use only).
  • Can also be mounted on a standard BS surface

  £33.48 INC. VAT
Timeguard PDSM361 Surface Mount 360 Degree PIR Presence Detector Single Channel
Timeguard PDSM361 Surface Mount 360 Degree PIR Presence Detector Single Channel - TIMPDSM361

Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference.

  • Single channel surface ceiling mount.
  • Switches lights on when presence is detected and to light levels (LUX) set.
  • 360º circular detection, range up to 7m at 2.5m mounting height.
  • 3 user friendly adjustments for Time, LUX levels and Metre range.
  • Timer adjustment – continuous from 5 sec to 20 minutes (up to 30 or 60 minutes with IR10 remote).
  • Lux adjustment – continuous from 10 to 2000 Lux.
  • Metre adjustment – approx (-) dia 1m to (+) dia 7m at 2.5m height.
  • Total switching: 2000W incandescent/halogen, 750W fluorescent/low energy.
  • Optional infra-red remote control for remote set-up and adjustment using part code IR-10. Also gives extended lamp ON times.
  • LED indication on detection and on optional remote control set-up

  £33.48 INC. VAT
Timeguard PDWM1500 Wall Mount 120 Degree PIR Presence Detector
Timeguard PDWM1500 Wall Mount 120 Degree PIR Presence Detector - TIMPDWM1500

Timeguard take PIR Presence Detection to the next level for optimum coverage and with up to 1500W loading and 10m detection range this powerful unit is the ideal choice for all energy saving installations.

  • Switches lights ON when presence is detected and to light level (LUX) settings.
  • Ideal for energy saving installations in the workplace, corridors, offices, toilets etc.
  • Up to 1500W loading (6A) for incandescent, halogen, fluorescent and inductive lighting or 250W (1A) fan.
  • Units can be wired in parallel (not exceeding total load).
  • Enhanced 120° detection zone for optimum coverage.
  • Up to 10m detection range for motion and 5m for presence detection at 1.8m mounting height.
  • User-friendly adjustment for:
* Light level –5 to 1000 LUX
* Time ON –1 to 30 minutes.
  • IP55 environmental rating (internal use only).
  • For surface mounting on a standard BS surface mount or flush m

  £33.48 INC. VAT

12